ANTIGRAV
FL CREPA VELVET Volcano Antigrav
ANTIGRAV
ANTIGRAV design sheets are extremely light, dimensionally stable and compact, which guarantees easy handling. Adaptation and further processing with standard cutting tools. Easy readjustment by gluing with MS polymer hybrid adhesive on all surfaces.
SIBU DESIGN wall panels on an innovative carrier plate: no expansion gaps, extremely light, dimensionally stable!
Product characteristics
FL CREPA VELVET Volcano Antigrav
Colour variants
FL CREPA VELVET Volcano Antigrav
Panel photo
Product characteristics
Product characteristic
non adhesive (NA)
Item number
22736
Format
2613x1005x6 mm
Surface material
PET-Fibre
Base material
PP-glass fibre
Material thickness mm
3,9 mm
Max. relief height in mm
6 mm
Temperature stability in °C
up to 50 ?C
Wet room suitability
Rolled packable
Smallest bending radius
1000 mm
Weight in kg / piece
3,9
Pattern Gradient
Please consider the design course
Flammability
DIN 4102 - B2
Machine-related dimensional and angle tolerances
+/- 2.0 mm in relation to 1,000 mm
Protection foil
GTIN-Code
9002582227364
Customs tariff number
39219060
Processing
Processing
non adhesive (NA)
Cutting
Punching
Drilling
Sawing
Milling
Laser cutting
Hot bending
PVA compressible
Extra equipment
Extra equipment
non adhesive (NA)
Special formats
Further thicknesses
Cuttings
Magnetic available
PVA treatment orderable
Special colors
On request
Further variants
FABRIC-LINE
EN13501-1 Flammability orderable
ASTM E84 Flammability orderable
Accessories
Accessories
non adhesive (NA)
Glue recommendation
MS polymer hybrid adhesives (cartouche)
Matching Edges
Matching Profiles
Balance Sheet
not necessary
Cleaning
Do not use abrasive cleaners, solvent cleaners or pure alcohol! Stains caused by oil, greases and ink must be removed immediately. Vacuum the surface in case of low pollution; in case of heavy pollution, dab the stain with an absorbent cloth, then wipe it off with mild soapy water.
Additional Info
Color variations are possible due to the manufacturing process and are no reason for complaint. Please consider the nap direction of the surface before further processing or product installation. If design panels are not installed in the same direction, there will be a visual color difference.
Processing guidelines
Please refer to the technical tables to see whether the respective processing is possible.
The interactive table is only available on the desktop. Please view this page on a desktop PC.
Product group
Base Material
Variation
Expansion joint
Processing
ANTIGRAV
absorbent
plasterboard, smoothed brickwork, raw MDF or chipboard etc.
&
non-absorbent
Glass, coated MDF, etc.
NA
non-adhesive design sheet
Glutolin UK, Bostik Ardaflex® Multi (tooth spatula A2, B3)
putty adhesive
K1-Hybrid adhesive: Bostik H551 Supergrip Multi, Ramsauer 640
cartridge adhesive for strand bonding
